Product ID:07 83070 580 SKID NOT LT GRAY
MSDS Date:07/23/1998
FSC:NIIN:Submitter:F BT
Status Code:A
MSDS Number: CLJDB

VALSPAR CORP

1101 THIRD ST SOUTH
MINNEAPOLIS, MN 55415
US

Emergency Phone: 800-228-5635

Info Phone: 612-332-7371

Cage: 13418

VALSPAR CORPORATION

MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/800-228-5635

Cage: 13418

QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL 0.10 MG/M3

ACGIH TLV: 0.10 MG/M3

TITANIUM OXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES
Health Hazards Acute and Chronic:IMMEDIATE EFFECTS (ACUTE):
OVEREXPOSURE TO INGREDIENTS IN THIS PRODUCT MAY CAUSE SKIN
IRRITATION. DELAYED EFFECTS (CHRONIC): CONTAINS CRYSTALINE SILICA.
THE IARC HAS DETERMINED THAT CRYSTALLINE SILI CA INHALED IN THE
FORM OF QUARTZ OR CRISTOBABLITE FROM OCCUPATIONAL SOURCES IS
CARCINOGENIC TO HUMANS (GROUP 1). REFER TO IARC MONOGRAPH 68 IN
CONJUNCTION WITH THE USE OF THESE MATERIALS. RISK OF CA NCER
DEPENDS ON DURATION AND LEVEL OF EXPOSURE. IN COATINGS PRODUCTS,
RISK IS DUE PRIMARILY TO INHALATION OF SANDING DUST OR RESPIRABLE
PARTICLES IN SPRAY MIST.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

First Aid:NONE

Flash Point Method:TCC
Flash Point:=121.1C, 250.F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR SELF CONTAINED
BREATHING APPARATUS OR AIR MASKS. CONTAINERS EXPOSED TO FIRE
SHOULD BE KEPT COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE. NO SENSITIVITY TO IMPACT.

Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS WITH INERT
ABSORBENT.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE ABOVE 120 DEG F. KEEP FROM FREEZING. EMPTY
CONTAINERS MAY CONTAIN PRODUCT RESIDUE. DO NOT CUT, PUNCTURE OR
WELD CONTAINERS. ALL LABEL WARNINGS MUST BE OBSERVED UNTIL
CONTAINER HAS BEEN CLEANED, RECONDITIONED OR PROPERLY DISPOSED OF.

Respiratory Protection:UNLESS AIR MONITORING DEMONSTRATES VAPOR/MIST
LEVELS ABOVE APPLICABLE LIMITS, NO RESPIRATOR IS REQUIRED. IF
RESPIRATOR IS REQUIRED, THE APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) S HOULD BE WORN DURING APPLICATION. FOLLOW
RESPIRATOR MANUFACTURERS DIRECTIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED WHEN SPRAYING OR APPLYING IN CONFINED AREA.
Protective Gloves:USUAL HAND PROTECTION FOR PAINT APPLICATION.
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Supplemental Safety and Health

Boiling Pt:=100.C, 212.F
Vapor Pres:24
Vapor Density:0.6
Spec Gravity:1.51
Evaporation Rate & Reference:0.4 (BUAC=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:46.55

Stability Indicator/Materials to Avoid:YES
AVOID WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SILICON DIOXIDE, HALIDES, METAL OXIDES

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

SARA Title III Information:NONE
Federal Regulatory Information:ALL IN COMPLIANCE WITH TSCA.